Comparative Analysis of Flat Slab and Grid Slab in Different Seismic Zones

Ainain Wantt

doi:10.55524/ijircst.2022.10.3.36

Abstract

Because of ever-increasing urbanization and a flexuous population, there has been an increasing call for the construction of tall buildings. Earthquakes are the bane of such tall buildings. Because earthquake forces are haphazard in nature and unpredictable, we want to develop engineering tools for studying systems under the influence of those forces. Thus, careful modeling of such earthquake loads is required in order to examine the behavior of the structure with a clear perspective of the harm that is expected. Examining the structure for different earthquake intensities, followed by exams for various criteria at each level, has become an essential exercise over the last two decades. [9]Earthquake-resistant design (ERD) of construction has advanced significantly since the preliminary thoughts took form in the early 20th century. The invention of accelerograph and introduction of response spectrum are the crucial steps in the history of ERD. The other essential development was the know-how of ductility and hysteretic damping. Gradually, the earthquake-resistant design has advanced considerably in the form of capacity design, displacement-based design, and performance-based design. Earthquakes cause varying degrees of shaking in different locations, and the damage caused to buildings in these locations is also unique. As a result, it is critical to build an earthquake-resistant structure that can withstand a certain level of shaking and absorb the impact of an earthquake. Because of the varying depths of earthquakes, identical magnitudes of earthquakes occur, resulting in varying destructive effects in various regions. As a result, the seismic behavior of buildings with comparable layouts must be understood under various earthquake intensities. It is critical to perform seismic evaluation of the structure using various available methods in order to determine seismic responses.

Keywords

Base shear, Bending moment, Gridslab, Nodal displacement, Shear force.

References

Sharma, J. and Singla, S., 2014. Influence of recycled concrete aggregates on strength parameters of concrete. SSRG International Journal of Civil Engineering, 1(4), pp.20-24.
Singla, N., Singla, S., Thind, P.S., Singh, S., Chohan, J.S., Kumar, R., Sharma, S., Chattopadhyaya, S., Dwivedi, S.P., Saxena, A. and Issakhov, A., 2021. Assessing the Applicability of Photocatalytic-Concrete Blocks in Reducing the Concentration of Ambient NO2 of Chandigarh, India, Using Box–Behnken Response Surface Design Technique: A Holistic Sustainable Development Approach. Journal of Chemistry, 2021.
Kumar, V., Singla, S. and Garg, R., 2021. Strength and microstructure correlation of binary cement blends in presence of waste marble powder. Materials Today: Proceedings, 43, pp.857-862.
Garg, R., Garg, R. and Singla, S., 2021. Experimental Investigation of Electrochemical Corrosion and Chloride Penetration of Concrete Incorporating Colloidal Nanosilica and Silica fume. Journal of Electrochemical Science and Technology, 12(4), pp.440-452.
Kansal, C.M., Singla, S. and Garg, R., 2020, November. Effect of Silica Fume & Steel Slag on Nano-silica based High-Performance Concrete. In IOP Conference Series: Materials Science and Engineering (Vol. 961, No. 1, p. 012012). IOP Publishing.
Bhatta, D.P., Singla, S. and Garg, R., 2021. Microstructural and strength parameters of Nano-SiO2 based cement composites. Materials Today: Proceedings, 46, pp.6743-6747.
Dhiman, S., Garg, R. and Singla, S., 2020, November. Experimental investigation on the strength of chipped rubber-based concrete. In IOP Conference Series: Materials Science and Engineering (Vol. 961, No. 1, p. 012002). IOP Publishing.
Khan, M.N., Singla, S. and Garg, R., 2020, November. Effect of Microsilica on Strength and Microstructure of the GGBS-based Cement composites. In IOP Conference Series: Materials Science and Engineering (Vol. 961, No. 1, p. 012007). IOP Publishing.
Fani, G.M., Singla, S. and Garg, R., 2020, November. Investigation on Mechanical Strength of Cellular Concrete in Presence of Silica Fume. In IOP Conference Series: Materials Science and Engineering (Vol. 961, No. 1, p. 012008). IOP Publishing.
Gatoo, A.H. and Singla, S., 2020. Feasibility of plastic and rubber emulsified road pavements & its contribution to solid waste management in India. Int J Adv Sci Technol.

Cites this article as

A. Wantt "Comparative Analysis of Flat Slab and Grid Slab in Different Seismic Zones", International Journal of Innovative Research in Engineering & Management (ijircst), Vol-10, Issue-3, Page No-213-218, 2022. Available from: https://doi.org/10.55524/ijircst.2022.10.3.36

Corresponding Author

Ainain Wantt

M. Tech. Scholar, Department of Civil Engineering, RIMT University, Punjab, India

Download Full Paper

Download PDF

No. of Downloads: 29 | No. of Views: 676

An Overview of Openings in Concrete Deep Beams-A Comprehensive Analysis

Bilal Alhammud, Dr. Ayse Yeter Günal, Rajab Alkhatib.

May 2024 - Vol 12, Issue 3
Properties of Concrete on Adding Polypropylene Fibre and Polyvinyl Chloride Fibre

Aaqib Bashir, Brahmjeet Singh.

January 2024 - Vol 12, Issue 1
Revitalizing Infrastructure: Assessing Concrete Jacketing for Reinforced Concrete Column Rehabilitation

Samsul Abdul Rahman Sidik Hasibuan.

January 2024 - Vol 12, Issue 1

Comparative Analysis of Flat Slab and Grid Slab in Different Seismic Zones

Citations

Download Full Paper PDF

Total View 676

Total Download 29