Elevated Water Tank Design Comparison in Different Seismic Zones

M. Kranthi Kumar; V. Rushendra Mani; Ch. Vinay Kumar; U. Divya; B. Balakrishna

doi:10.55524/ijircst.2022.10.1.24

Abstract

Water is maintained in tall tanks as part of the public water system. Because of a shortage of water or difficulties putting out a fire after an earthquake, the collapse of these water tanks could pose major risks to people. According to draught code Part II of IS 1893:2002, twelve raised circular and H-intake storage tanks with a combined capacity of two lakh litres each would be studied in this study. STAAD Pro V8i is used to conduct a response spectrum analysis of elevated circular and H-shaped water intake tanks in seismic zones II and V. A comparison was made between each collected value for the base shear axial force and lateral displacements. There is a divergence in the H-tank and a negligible variance, according to analysis of a comparison of two water tanks.

Keywords

Elevated Circular Water Tank, Elevated H- Intake Water Tank, Response Spectrum Analysis.

References

1. 1. Nitesh J Singh1, Mohammad Ishtiyaque “Design analysis & comparison of H- intake type water tank for different wind speed and seismic zones as per Indian code”, International Journal of Research in Engineering and Technology ISSN: 2319-1163 ISSN: 2321-7308 Volume: 04 Issue: 09 | September-2015.
  2. Rupachandra J. Aware, “Seismic Performance of Circular Elevated Water Tank Shri Vitthal Education & Research Institute College of Engineering”, International Journal of Science and Research (IJSR) ISSN (Online): 2319- 7064Volume: 4 Issue: 12, December 2015
  3. Sonali M. Maidankar1, Prof. G.D. Dhawale2, Prof. S.G. Makarande3"Seismic Analysis of Elevated Circular Water Tank using various Bracing Systems”, International Journal of Advanced Engineering Research and Science (IJAERS), ISSN: 2349-6495, Vol-2, Issue-1, Jan.- 2015.
  4. A.D.V.S. Uma Maheswari1, B. Sravani Performance of elevated circular water tank in different seismic zones International Journal for Technological Research in Engineering ISSN (Online): 2347 - 4718 Volume 3, Issue 5, January- 2016
  5. Jain, S.K., and Sajjad, S.U. (1993). “A Review of requirements in Indian codes for a seismic design of Elevated water tanks”. The Bridge and structural Engineering, volume:4, Issue:1,12(1), 1-15.
  6. O. R. Jaiswal and S. K. Jain, “Modified Proposed Provisions for Aseismic Design of Liquid Storage Tanks: Part II – Commentary and Examples”, Journal of Structural Engineering Vol. 32, No.4, 2005.
  7. O. R. Jaiswal, S. Kulkarni, P. Pathak, “A Study on Sloshing Frequencies of Fluid-Tank System”, in Proceedings of 14th World Conference on Earthquake Engineering, Beijing, China, 2008.
  8. S. Hirde, A. Bajare, M. Hedaoo, “Seismic Performance of Elevated Water Tanks”, International Journal of Advanced Engineering Research and Studies E-ISSN2249 – 8974, 2011
  9. M. V. Gaikwad, M. N. Mangulkar, “Seismic Performance of Circular Elevated Water Tank with Framed Staging System” International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 4, Issue 4, May– June 2013, pp. 159-167, 2013.
  10. Ankita Singh, Prashant “,Khutemate seismic analysis of the elevated water tank for variation in bracings patterns and water fill conditions”, ISSN-2349-5162, Volume 8, Issue:1,2021 JETIR January 2021
  11. G. N. Gopu and S. A. Joseph, “Corrosion Behavior of Fiber-Reinforced Concrete—A Review,” Fibers 2022, Vol. 10, Page 38, vol. 10, no. 5, p. 38, Apr. 2022, doi: 10.3390/FIB10050038.
  12. G. Ganesh Naidu, M. Sri Durga Vara Prasad, and A. Venkata Sai Pavani, “Impact of chloride attack on basalt fibre reinforced concrete,” Int. J. Innov. Technol. Explor. Eng., vol. 8, no. 12, 2019, doi: 10.35940/ijitee. L3502.1081219.
  13. G. Ganesh Naidu, M. Sri Durga Vara Prasad, and K. Anil Kumar, “Strengthening of reinforced concrete continuous beams using GFRP,” Int. J. Eng. Adv. Technol., vol. 9, no. 1, 2019, doi: 10.35940/ijeat. A1504.109119.
  14. A. Sofi and G. Naidu Gopu, “Influence of steel fibre, electrical waste copper wire fibre and electrical waste glass fibre on mechanical properties of concrete,” IOP Conf. Ser. Mater. Sci. Eng., vol. 513, no. 1, 2019, doi: 10.1088/1757-899X/513/1/012023.
  15. G. Ganesh Naidu, M. Sri Durga Vara Prasad, and E. Mani, “Mechanical behaviour of fibre reinforced concrete using shape memory alloys,” Int. J. Innov. Technol. Explor. Eng., vol. 9, no. 1, 2019, doi: 10.35940/ijitee. A3998.119119.
  16. G. Ganesh Naidu, M. Sri Durga Vara Prasad, N. Venkata Kishore, and R. Hari Prasad, “Influence of pet waste on mechanical properties of concrete,” Int. J. Eng. Adv. Technol., vol. 9, no. 1, 2019, doi: 10.35940/ijeat. A9849.109119.
  17. G. Ganesh Naidu, M. Sri Durga Vara Prasad, U. Upendra Varma, and S. Sandhya, “Effect of R.O. waste water on properties of concrete,” Int. J. Recent Technol. Eng., vol. 8, no. 3, 2019, doi: 10.35940/ijrte.C5201.098319.
  18. G. N. Gopu and A. Sofi, “Electrical Waste Fibers Impact on Mechanical and Durability Properties of Concrete,” Civ. Eng. Archit., vol. 9, no. 6, pp. 1854–1868, 2021, doi: 10.13189/cea.2021.090618.
  19. G. Ganesh Naidu, K. Anusha, M. S. D. Vara Prasad, and P. Ravi Kumar, “Structural health monitoring of beam retrofitted with SMA using piezoelectric transducers,” Int. J. Sci. Technol. Res., vol. 9, no. 3, pp. 5935–5937, 2020

Cites this article as

M. K. Kumar, V. R. Mani, C. V. Kumar, U. Divya, B. Balakrishna, "Elevated Water Tank Design Comparison in Different Seismic Zones", International Journal of Innovative Research in Computer Science and Technology (IJIRCST), Vol-10, Issue-1, Page No-130-135, 2022. Available from: https://doi.org/10.55524/ijircst.2022.10.1.24

Corresponding Author

M. Kranthi Kumar

Assistant Professor, Department of Civil Engineering, PACE Institute of Technology & Sciences, Ongole, Andhra Pradesh, India

Download Full Paper

Download PDF

No. of Downloads: 32 | No. of Views: 1178

Elevated Water Tank Design Comparison in Different Seismic Zones

Citations

Download Full Paper PDF

Total View 1178

Total Download 32