Polymer Modified Flexible Pavement and Characterization

Mushtaq Ahmad Bhat

doi:10.55524/ijircst.2022.10.6.4

Abstract

Rutting is an essential explanation of untimely disintegration of black-top roadway asphalts. Asphalts constructed with polymer and different modifiers are showing further developed execution. The virgin black-top and changed asphalt binders and blends utilized on a few test segments of the I-55 thruway restoration project in northern Missis-sappy are looked at. The research centre downer consistence information for these fasteners were estimated at low temperatures using a changed test technique adjusted for the Twisting Pillar Rheometer gadget. Dynamic Shear Rheometer was utilized at high assistance temperatures. The drag consistence information of the cover was utilized as a contribution to Simu-late downer consistence conduct of the blend utilizing a micromechanical model. The field assessment affirms therelatively lackluster showing of the virgin black-top area regarding rutting, contrasted with adjusted binder sections.

Keywords

Polymers, Flexible Pavement, Betimes, Marshall Stability

References

Bitumen Basics, BP Bitumen, 2nd edition, June 2011.
Read, J. and Whiteoak, D. (2003), The Shell Bitumen Handbook, Fifth Edition.
Whiteoak, D. (1991), The Shell Bitumen Handbook, Published by Shell Bitumen UK.
Sivasankar. (2008), Engineering Chemistry book, pp. 358.
Petersen, J.C. (1984), Chemical composition of asphalt as related to asphalt durability: state of the art, Transportation Research Record-999.
Morgen, P. and Mulder, A. (1995), The Shell Bitumen Industrial Handbook, Shell Bitumen Publications, London.
Lutchminarine, C., Robin, W. and Clayton, S. (1992), Improved methods for separation and chromatographic analysis of natural asphalts, Analyst, Vol.117. pp.1869-1873.
Kerbs, R.D. and Walker, R.D. (1971), Highway Materials, McGraw Hill Book Co., New York, USA.
Chen, J.S. and Tsai,C.J. ( 1999), How good are linear viscoelastic properties of asphalt binder to predict rutting and fatigue cracking, Journal of Materials Engineering and Performance, Vol.8. No.4, pp. 443-449.
Anderson, D. A., Christensen, D. W., Bahia, H. U., Dongré, R., Sharma, M. G., Antle, C. E. and Button, J. (1994), Binder Characterization and Evaluation: Physical Characterization. Report SHRP-A-369.Vol.3. pp.57-134.
Anderson, D. A., Kennedy, T. and W. J. Assoc. (1993), Asphalt Paving Technol, Vol. 62. pp. 481.
Roberts, F., Kandhal, p., Brown, E., Lee, D. and Kennedy, T. (1996), Hot Mix Asphalt Materials, Mixture Design, and Construction. 2nd edition. Lanham, Maryland: NAPA Education Foundation.

Cites this article as

[Mushtaq Ahmad Bhat, Er. Sakshi Bhatia (2022), Polymer Modified Flexible Pavement and Characterization, International Journal of Innovative Research in Computer Science & Technology (IJIRCST), Vol-10, Issue-6, Page No-23-28], (ISSN 2347 - 5552). www.ijircst.org

Corresponding Author

Mushtaq Ahmad Bhat

M. Tech Scholar, Department of Civil Engineering, RIMT University, Mandi Gobindgarh, Punjab, India

Download Full Paper

Download PDF

No. of Downloads: 11 | No. of Views: 302

Experimental Investigation Mechanical Properties of Concrete Mix with Chopped Jute Fiber and Fly Ash

Nadiya Majeed, Brahamjeet Singh.

March 2023 - Vol 11, Issue 2
Stabilization of Black Cotton Soil by Using Waste Foundry Sand and Crushed Waste Glass

Ishrat Mairaj.

March 2023 - Vol 11, Issue 2
Non-Linear Behavior of Reinforced Concrete Frame Structure with Vertical Irregularities

Samsul A Rahman Sidik Hasibuan, Faqih Ma’arif, Baskoro Abdi Praja.

January 2023 - Vol 11, Issue 1

IJIRCST

Polymer Modified Flexible Pavement and Characterization

Citations

Download Full Paper PDF

Total View 302

Total Download 11