Simulation Model for Investigation of Probable Activity Production Rates

Akash T

doi:10.55524/ijircst.2025.13.4.9

Abstract

The construction industry is the key to the infrastructure development around the world; however, it is often faced with uncertainties that interfere with the implementation of projects and cause inefficiencies. The correct estimation of the production rate of the activities, i.e. the amount of output that can be produced in a particular suggested unit time or resources, in cases like excavation, pouring concrete or installing steel is vital to robust project planning, scheduling and cost management. The traditional deterministic methods that presuppose the existence of fixed input such as historical averages or expert opinions, do not usually reflect the dynamic variation of the construction settings. Issues like variable labor productivity, variable supply of materials, weather issues and site constraints add much risk into the equation and result in delays and cost overruns on around 70 percent of projects globally. The paper offers solutions to these problems as it is based on creation of very advanced model that uses simulation method due to estimation of likely rates of production taking probabilistic factor to reflect complexities that exist in the real world. The key aims are to create a Monte Carlo simulation framework that will simulate rates of production under uncertainty and show its accuracy with historical data of a project and to assess the effects on important project cost and time metrics. The model was developed in Python with the help of libraries like NumPy which is used to perform numerical calculations and statistical analysis performed using SciPy. The model uses probability distributions (exemplified by a triangular probability distribution applied to chooses labor productivity and a normal probability distribution applied to weather delays) to simulate thousands of iterations. The results/outputs contain average levels of productions, confidence intervals, risk profile, which gives an overall idea of the results that can be obtained. The utility of the model is demonstrated by a case study of a mid-scale commercial building project which indicates that uncertainty effects can change the rate estimates of production by up to 25 percent in cases where the deterministic models are used. Sensitivity analyses allow pointing out important sources of uncertainty, including factors like labor variation and delayed materials so that risk mitigation activities can be purposefully focused. Findings are an improvement in the predictive accuracy with the mean absolute percentage error being less than 10 percent when compared to historical data as compared to traditional methods. The implications of the model include better resource assignment, intelligent choice, and a 15-20 percent decrease in project risks so that there is efficiency and cost effectiveness. Filling the gaps in probabilistic modeling, the work proposes an efficient user-friendly instrument to practitioners and researchers in the construction domain since it is scalable, consistent with the trend toward digitalization of construction industry in projects with Building Information Modeling (BIM) and documents the nature of the project through data-driven management, which can promote sustainable approaches.

Keywords

Simulation Modeling; Production Rates; Construction Activities; Probabilistic Analysis; Monte Carlo Simulation; Project Management; Uncertainty Modelling.

References

Sayed, M. E., Abd El-Karim, M., & El-Dash, K., “Fixed start method for repetitive project scheduling with simulated annealing and fuzzy logic,” Heliyon, vol. 11, no. 2, p. e24864, 2025. Available from: https://www.cell.com/heliyon/fulltext/S2405-8440(25)00121-5
Akash, T., and Sambhaji Padwal, “Analysing the Impact of Linear Scheduling Methods on Time and Cost Efficiency in Roadwork Projects,” International Journal of Innovative Research in Engineering & Management (IJIREM), vol. 12, no. 2, pp. 84–90, Apr. 2025. Available from: https://tinyurl.com/p72ehe4x
Shi, Y., Du, J., & Worthy, R., “Digital twin for production estimation, scheduling and real-time monitoring in offsite construction,” Computers in Industry, vol. 158, p. 104093, 2024. Available from: https://doi.org/10.1016/j.cie.2024.110173
Tang, W., Lei, Z., Wang, W., Wang, H., & Fu, Y., “Application of machine learning in construction productivity at project level: A review,” Applied Sciences, vol. 14, no. 22, p. 10605, 2024. Available from: https://doi.org/10.3390/f15081288
González, V., & Echaveguren, T., “Integration of discrete event simulation with other modeling techniques in construction management: A review,” Revista de la Construcción, vol. 21, no. 2, pp. 338–353, 2022. Available from: http://dx.doi.org/10.7764/rdlc.21.2.338
Chan, A. P., Yung, E. H., Lam, P. T., Tam, C. M., & Cheung, S. O., “Systematic review of the literature on construction productivity,” Journal of Construction Engineering and Management, vol. 129, no. 5, pp. 512–524, 2023. Available from: https://doi.org/10.1061/JCEMD4.COENG-13045
Abdelrahman, H., Al Haddad, R., Rashed, A., Salman, A., & Ayyad, T., “Predictive analytics for early-stage construction costs estimation: Towards a statistical comparative approach,” Buildings, vol. 12, no. 7, p. 1043, 2022. Available from: https://doi.org/10.3390/buildings12071043
Rauch, E., Dallasega, P., & Matt, D. T., “Complexity reduction in engineer-to-order industry through real-time capable production planning and control,” Production Engineering, vol. 12, no. 3, pp. 341–352, 2018. Available from: https://link.springer.com/article/10.1007/s11740-018-0809-0
Jeong, W., Chang, S., Son, J., & Yi, J. S., “BIM-integrated construction operation simulation for just-in-time production management,” Sustainability, vol. 8, no. 11, 2016. Available from: https://doi.org/10.3390/su8111106
Wibowo, A., & Mohamed, Y., “Systematic review of Lean Construction: An approach to understanding the state of the art and future directions,” Journal of Infrastructure Preservation and Resilience, vol. 6, no. 1, pp. 1–19, 2025. Available from: https://link.springer.com/article/10.1186/s43065-025-00119-1
Sbiti, M., Beddiar, K., Beladjine, D., Perrault, R., & Mazari, B., “Toward BIM and LPS data integration for lean site project management: A state-of-the-art review and recommendations,” Buildings, vol. 11, no. 5, p. 196, 2021. Available from: https://doi.org/10.3390/buildings11050196
American Society of Civil Engineers, “Publishing in ASCE journals: Journal of construction engineering and management,” ASCE Library, n.d. Available from: https://doi.org/10.1061/(ASCE)0733-9364(2004)130:3(440)
Castañeda, K., Sánchez, O., Herrera, R. F., & Mejía, G., “Deficiencies causes in road construction scheduling: Perspectives from construction professionals,” Heliyon, vol. 11, no. 2, 2025. Available from: https://www.cell.com/heliyon/fulltext/S2405-8440(24)17545-7
International Journal of Productivity and Quality Management, “Forthcoming articles,” Inderscience Publishers, n.d. Available from: https://doi.org/10.1504/IJPQM.2024.140060
Afzal, M., & Teizer, J., “Improving construction safety with virtual-design construction technologies: A review,” Journal of Information Technology in Construction, vol. 26, pp. 319–343, 2021. Available from: https://tinyurl.com/mujnjvkc
Patel, D. A., Lad, V. H., Chauhan, K. A., & Patel, K. A., “Fuzzy system dynamic model for simulation of new rail track construction machine productivity in India,” Engineering, Construction and Architectural Management, vol. 31, no. 13, pp. 108–128, 2024. Available from: https://doi.org/10.1108/ECAM-08-2024-1151
Watkins, P., Gelder, M., & Frias, A., “Furthering the Science of Gratitude,” in Oxford Handbook of Positive Psychology, pp. 437–445, 2012. Available from: https://doi.org/10.1093/oxfordhb/9780195187243.013.0041
Halpin, D. W., & Riggs, L. S., Planning and Analysis of Construction Operations, John Wiley & Sons, 1992. Available from: https://tinyurl.com/26husjmf
AbouRizk, S. M., & Halpin, D. W., “Optimal productivity in labor-intensive construction operations,” Journal of Construction Engineering and Management, vol. 118, no. 3, pp. 535–553, 1992. Available from: https://doi.org/10.1061/(ASCE)CO.1943-7862.0001257
Arun, C., & Rao, N. B., “Probability distribution analysis of activity duration in Indian highway projects,” in Proc. 9th East Asia Pacific Conf. on Structural Engineering and Construction, Bali, Indonesia, pp. 164–174, 2003. Available from: https://tinyurl.com/4w5cht2w
Thomas, H. R., & Završki, I., “Construction baseline productivity: Theory and practice,” Journal of Construction Engineering and Management, vol. 125, no. 5, pp. 295–303, 1999. Available from: https://doi.org/10.1061/(ASCE)0733-9364(1999)125:5(295)
Borshchev, A., The Big Book of Simulation Modeling: Multimethod Modeling with AnyLogic 6, AnyLogic North America, 2013. Available from: https://tinyurl.com/y2txky9v

Cites this article as

A. T. "Simulation Model for Investigation of Probable Activity Production Rates", International Journal of Innovative Research in Computer Science and Technology (IJIRCST), Vol-13, Issue-4, Page No-85-94, 2025. Available from: https://doi.org/10.55524/ijircst.2025.13.4.9

Corresponding Author

Akash T

Research Scholar, Department of Civil Engineering, Sunrise University, Alwar, Rajasthan, India

Download Full Paper

Download PDF

No. of Downloads: 21 | No. of Views: 1200

Examining the Quality Management System's Efficiency in Construction

Akash. T .

September 2025 - Vol 13, Issue 5
Duration Forecasting In Construction Projects: A Delphi-Based Approach

Akash T .

July 2025 - Vol 13, Issue 4
An Overview of Openings in Concrete Deep Beams-A Comprehensive Analysis

Bilal Alhammud, Dr. Ayse Yeter Günal, Rajab Alkhatib.

May 2024 - Vol 12, Issue 3

Simulation Model for Investigation of Probable Activity Production Rates

Citations

Download Full Paper PDF

Total View 1200

Total Download 21