Stress-Strain Curves and Residual Stress Analysis for Hot-Rolled Steels

Ajay Agrawal; Shikha Parashar

doi:10.55524/ijircst.2021.9.6.18

Abstract

In recent years, usage of advanced analytical as well as computational modeling in operational production has expanded significantly. An essential component of models is a thorough description of stress-strain behavior of material. The current article is about creating uniform act on equations for full stress-strain reply of hot-rolled carbon steels. The theoretical models imply a flexible until yield point, shadowed to a yield besides toughening till ultimate stress, giving different options for interpretation of strain hardening component. The engineer usually finds Young's modulus E, yield stress fy and ultimate stress fu readily accessible, but certain critical limitations, including stresses at start of straining hardening as well as at ultimate stress, are not, thus require predictive terminology. The phrases were industrialized here every day in addition to standardized against facts produced from literary works on stress-strain. Unlike usually ECCS model that has a persistent strain toughening slope, optional models feature a yield duration besides strain hardening characteristics that vary with yield ratio to ultimate stress.

Keywords

Curves, Hot-Rolled Steels, Residual Stress, Stress-Strain.

References

Yun X, Gardner L. Stress-strain curves for hot-rolled steels. J Constr Steel Res. 2017;
Mirzadeh H, Cabrera JM, Prado JM, Najafizadeh A. Hot deformation behavior of a medium carbon microalloyed steel. Mater Sci Eng A. 2011;
Sun R, Xu W, Wang C, Shi J, Dong H, Cao W. Work hardening behavior of ultrafine grained duplex medium-Mn steels processed by ART-annealing. In: Steel Research International. 2012.
Li HT, Young B. Residual mechanical properties of high strength steels after exposure to fire. J Constr Steel Res. 2018;
Guo-Zheng Q. Characterization for Dynamic Recrystallization Kinetics Based on Stress-Strain Curves. In: Recent Developments in the Study of Recrystallization. 2013.
Tao Z, Wang XQ, Uy B. Stress-strain curves of structural and reinforcing steels after exposure to elevated temperatures. J Mater Civ Eng. 2013;
Gardner L, Yun X. Description of stress-strain curves for cold-formed steels. Constr Build Mater. 2018;
Samantaray D, Mandal S, Bhaduri AK, Venugopal S, Sivaprasad P V. Analysis and mathematical modelling of elevated temperature flow behaviour of austenitic stainless steels. Mater Sci Eng A. 2011;
Choudhury FK, Rivero RM, Blumwald E, Mittler R. Reactive oxygen species, abiotic stress and stress combination. Plant J. 2017;
De Giorgi M. Residual stress evolution in cold-rolled steels. Int J Fatigue. 2011;

Cites this article as

A. Agrawal, S. Parashar, "Stress-Strain Curves and Residual Stress Analysis for Hot-Rolled Steels", International Journal of Innovative Research in Engineering & Management (ijircst), Vol-9, Issue-6, Page No-77-81, 2021. Available from: https://doi.org/10.55524/ijircst.2021.9.6.18

Corresponding Author

Ajay Agrawal

SOEIT, Sanskriti University, Mathura, Uttar Pradesh, India (ajayagrawal.me@sanskriti.edu.in)

Download Full Paper

Download PDF

No. of Downloads: 32 | No. of Views: 1039

Real-Time Detection of Data Exfiltration Using Deep Learning in Edge Computing Systems

Shivaraj Yanamandram Kuppuraju, Sharad Shyam Ojha, Mrinal Kumar.

March 2025 - Vol 13, Issue 2
AI-Based Encryption Techniques for Securing Data Transmission in Telecommunication Systems

Shiva Kiran Lingishetty, Chandrashekhar Moharir, Mrinal Kumar.

March 2025 - Vol 13, Issue 2
Leveraging Reinforcement Learning for Efficient Task Scheduling in Multi-Cloud Environments

Prasanna Sankaran, Shiva Kiran Lingishetty, Mrinal Kumar.

March 2025 - Vol 13, Issue 2

Stress-Strain Curves and Residual Stress Analysis for Hot-Rolled Steels

Citations

Download Full Paper PDF

Total View 1039

Total Download 32