The Initial Process of Dam Construction is Seen from a Topographical Perspective (Bench Mark Coordinates and Control Point Coordinates): Case study of D.I. Bajayu Kab Serdang Bedagai

Tika Ermita Wulandari

doi:10.55524/ijircst.2023.11.2.7

Abstract

The research aims to determine the initial process of dam construction is seen from a topographical perspective ( bench mark coordinate and control point coordinates: case study of D.I. Bajayu kab. Serdang Bedagai. The aim and objective of this topographic survey is to collect topographical data from the field in order to produce supporting data in the form of a topographical/situation base map including cross-sectional and longitudinal cross-sectional images along the measurement location. Measurement 20 data of topographi for BM coordinat and CP coordinat, so: measurements are made up to 50 meters from the left and right bank of the river, measurement lengthwise (long section) of ± 8.2 km was carried out from the confluence of the Padang river with the Bah disappeared river to the Bajayu free intake location, measurement benchmark interval for 100 meters straight area and 50 meters turning area,conduct measurements on the linking route/trace from the planned main building to the free intake of D.I Bajayu and the first building for D.I Paya Lombang, measuring 50 meter intervals, the length of the measurement path from the axle of the weir to the Bajayu free intake is 3,600 m following the embankment to the right of the Padang river, the length of the canal trace from the axle of the weir to the building for the first Paya Lombang is 4,600 m following the existing road.

Keywords

Initial process; Dam contruction; Topographical perspective; Bench mark coordinate;Control point coordinate; case study of D.I. Bajayu kab. Serdang Bedagai.

References

Y. Wang, L. Feng, J. Liu, X. Hou, and D. Chen, “Changes of Inundation Area and Water Turbidity of Tonle Sap Lake: Responses to Climate Changes or Upstream Dam Construction?,” Environ. Res. Lett., vol. 15, no. 9, 2020, doi: 10.1088/1748-9326/abac79.
D. G. Sahlol, E. Elbeltagi, M. Elzoughiby, and M. Abd Elrahman, “Sustainable Building Materials Assessment and Selection Using System Dynamics,” J. Build. Eng., vol. 35, 2021, doi: 10.1016/j.jobe.2020.101978.
A. Almusaed, A. Almssad, R. Z. Homod, and I. Yitmen, “Environmental Profile on Building Material Passports for Hot Climates,” Sustain., vol. 12, no. 9, 2020, doi: 10.3390/su12093720.
L. Ben-Alon, V. Loftness, K. A. Harries, E. C. Hameen, and M. Bridges, “Integrating Earthen Building Materials and Methods into Mainstream Construction,” J. Green Build., vol. 15, no. 1, 2020, doi: 10.3992/1943-4618.15.1.87.
5.Y. Fujihara et al., “Characteristics of the Annual Maximum and Minimum Water Temperatures in Tonle Sap Lake, Cambodia from 2000 to 2019,” Remote Sens., vol. 13, no. 19, 2021, doi: 10.3390/rs13193972.
R. B. Dos Santos and J. L. Palomino-Tamayo, “Coupling SAP 2000 with ABC Algorithm for Truss Optimization,” DYNA, vol. 87, no. 212, 2020, doi: 10.15446/dyna.v87n212.79614.
M. Legan, A. Ž. Gotvajn, and K. Zupan, “Potential of Biochar Use in Building Materials,” Journal of Environmental Management, vol. 309. 2022, doi: 10.1016/j.jenvman.2022.114704.
S. Huang et al., “Residential Building Materials: An Important Source of Ambient Formaldehyde in Mainland China,” Environ. Int., vol. 158, 2022, doi: 10.1016/j.envint.2021.106909.
A. Ahmed, “Dynamic Analysis of Multi-Storey RCC Building Frames,” Nternational J. Innov. Res. Technol., vol. 3, no. 3, 2016.
H. Satria, S. Syafii, R. Salam, M. Mungkin, and W. Yandi, “Design Visual Studio Based GUI Applications on - Grid Connected Rooftop Photovoltaic Measurement,” TELKOMNIKA Telecommun. Comput. Electron. Control, vol. 20, no. 4, pp. 914–921, 2022, doi: 10.12928/TELKOMNIKA.v20i4.23302.

Cites this article as

[Tika Ermita Wulandari, Indri Dayana, Habib Satria (2023), The Initial Process of Dam Construction is Seen from a Topographical Perspective (Bench Mark Coordinates and Control Point Coordinates): Case study of D.I. Bajayu Kab Serdang Bedagai, International Journal of Innovative Research in Computer Science & Technology (IJIRCST), Vol-11, Issue-2, Page No-34-37], (ISSN 2347 - 5552). www.ijircst.org

Corresponding Author

Tika Ermita Wulandari

Engineering Faculty, Universitas Medan Area, Medan, Indonesia

Download Full Paper

Download PDF

No. of Downloads: 27 | No. of Views: 216

The Simple Model of Newton's II Law and Its Applications

Indri Dayana, Habib Satria, Yudi.

March 2023 - Vol 11, Issue 2
Effect of Internal Resistance on Electric Current in a Closed Circuit

Mega Puspita Sari, Indri Dayana, Habib Satria.

March 2023 - Vol 11, Issue 2
Applying the Data Center Infrastructure Management (DCIM) Tool to Enhance the Quality Management of the Data Centers by Decreasing the Unplanned Outage Reasons

Diaa Eldin Mogahed, Ahmed I. B. El Seddawy.

July 2022 - Vol 10, Issue 4

IJIRCST

The Initial Process of Dam Construction is Seen from a Topographical Perspective (Bench Mark Coordinates and Control Point Coordinates): Case study of D.I. Bajayu Kab Serdang Bedagai

Citations

Download Full Paper PDF

Total View 216

Total Download 27