[1]  N. Jain and Y. Awasthi, “WSN-AI based Cloud computing architectures for energy efficient climate smart agriculture with big data analysis,” Int. J.          Adv. Trends Comput. Sci. Eng., 2019.

[2]  M. Iyer et al., “Environmental survival of SARS-CoV-2 – A solid waste perspective,” Environ. Res., 2021.

[3]  S. Sarkar, U. Ray, D. Roy, D. Banerjee, and K. Kumar Chattopadhyay, “Synthesis of silicon nanowire and crystalline carbon quantum dots                      heterostructure and study of photo response and photoluminescence property,” Mater. Lett., 2021.

[4]  S. Stojkovikj, S. Oklevski, O. P. Jasuja, and M. Najdoski, “Visualization of latent fingermarks on thermal paper: A new method based on nitrogen            dioxide treatment,” Forensic Chem., 2020.

[5]  L. Matsakas, Q. Gao, S. Jansson, U. Rova, and P. Christakopoulos, “Green conversion of municipal solid wastes into fuels and chemicals,” Electronic        Journal of Biotechnology. 2017.

[6]  J. L. Easterly and M. Burnham, “Overview of biomass and waste fuel resources for power production,” Biomass and Bioenergy, 1996.

[7]  S. Parashar and V. K. Chawla, “A systematic review on sustainable green fibre reinforced composite and their analytical models,” in Materials                Today: Proceedings, 2020.

[8]  M. D. M. Samsudin and M. M. Don, “Municipal solid waste management in Malaysia: Current practices, challenges and prospect,” J. Teknol.                  (Sciences Eng., 2013.

[9]  A. Rihan, Quaisarperween, K. Gaurav, Jayanand, and V. R. Durg, “Effect of butylated hydroxyanisole on hydrogen peroxide induced oxidative                stress on cerebral glioma cell line,” Asian J. Pharm. Clin. Res., 2014.

[10] Jayanand, M. Gupta, A. Sinha, I. Insa, and D. V. Rai, “Antibacterial potential of Cymbopogon flexuosus oil against Enterobacter aerogenes                      and Klebsiella pneumoniae,” Biomed., 2014.

[11] J. Jamradloedluk and C. Lertsatitthanakorn, “Characterization and utilization of char derived from fast pyrolysis of plastic wastes,” in Procedia               Engineering, 2014.

[12] D. Singh, M. Gupta, R. C. Singh, S. P. Pandey, R. K. Karn, and P. K. Singh, “Polyvinylpyrrolidone (PVP) with Ammonium Iodide (NH4I) and 1-Hexyl-         3-Methylimidazolium Iodide Ionic Liquid Doped Solid Polymer Electrolyte for Efficient Supercapacitors,” Macromol. Symp., 2019.

[13] M. I. Tabash, M. A. Albugami, M. Salim, and A. Akhtar, “Service quality dimensions of E-retailing of Islamic banks and its impact on customer                 satisfaction: An empirical investigation of Kingdom of Saudi Arabia,” J. Asian Financ. Econ. Bus., 2019.

[14] S. H. Cha, J. H. Son, Y. Jamal, M. Zafar, and H. S. Park, “Characterization of polyhydroxyalkanoates extracted from wastewater sludge under                 different environmental conditions,” Biochem. Eng. J., 2016.

[15] M. Olazar, G. Lopez, M. Amutio, G. Elordi, R. Aguado, and J. Bilbao, “Influence of FCC catalyst steaming on HDPE pyrolysis product distribution,” J.         Anal. Appl. Pyrolysis, 2009.

[16] L. Dai et al., “Production of bio-oil and biochar from soapstock via microwave-assisted co-catalytic fast pyrolysis,” Bioresour. Technol., 2017.

[17] G. Liu, Y. Liao, S. Guo, X. Ma, C. Zeng, and J. Wu, “Thermal behavior and kinetics of municipal solid waste during pyrolysis and combustion                   process,” Appl. Therm. Eng., 2016.

[18] M. He et al., “Syngas production from pyrolysis of municipal solid waste (MSW) with dolomite as downstream catalysts,” J. Anal. Appl. Pyrolysis,           2010.

[19] M. Rehan et al., “Effect of zeolite catalysts on pyrolysis liquid oil,” Int. Biodeterior. Biodegrad., 2017.

[20] T. Namioka et al., “Hydrogen-rich gas production from waste plastics by pyrolysis and low-temperature steam reforming over a ruthenium                     catalyst,” Appl. Energy, 2011.

Associate Professor, Department of Life Sciences, Vivekananda Global University, Jaipur, India