IJIRCST

Improve the Photovoltaic Performing of Carbon-Form Perovskite Solar Cells

Deepak Choudhary

A solvent-assisted approach was established to make CH3NH3PbI3 perovskite absorber layers. A mixture of CH3NH3I, PbI2, c-butyrolactone, and dimethyl sulfoxide (DMSO) was used, followed by the addition of chlorobenzene (CB). The approach produced ultra-flat and dense perovskite capping layers atop mesoporous films TiO2, allowing for a significant boost in the performance of carbon electrode-form perovskite solar cells using free whole transport material (HTM) (PSCs). As a comparative solvent, toluene (TO) was also investigated. The generated HTM-free PSCs form on drop-casting CB showed a power conversion efficiency (PCE) of 9.73 percent at an annealing temperature of 100 C, which is 36 and 71 percent greater than those fabricated from perovskite films using TO or without adding an additional solvent, respectively. The interaction between the intermediate phase of PbI2–DMSO–CH3NH3I and the extra solvent was discussed. The effect of annealing temperature on absorber film development, morphology, and crystalline structure was also examined, and the results were connected with photovoltaic performance. Highly efficient, simple, and stable HTM-free solar cells with a PCE of 11.44 percent were created using the best perovskite absorbers annealed at 120 C.

Perovskite, Solar Cells, Carbon Form, Photovoltaic, Spin coating

H.J. Snaith. (2014). Efficient hybrid solar cells form on meso-superstructured orga-nometal halide perovskites. Science 338(6107), 643–647.
M.B. Johnston, & H.J. Snaith. (2017). Efficient planar hetero-junction perovskite solar cells by vapour deposition. Nature 501(7467), 395–398.
S.D. Stranks, & R.J. Nicholas. (2018). Carbon nanotube/polymer composites as a highly stable hole collection layer in perovskite solar cells. Nano Lett, 14(10), 5561–5568.
T. Song. (2016). Interface engineering of highly efficient perovskite solar cells. Science 345(6196), 542–546.
D.W. Zhang. (2019). Graphene-form counter electrode for dye-sensitized solar cells. Carbon 49(15), 5382–5388.
J. Wang. (2020). A bi-layer composite film form on TiO2 hollow spheres, P25, and multi-walled carbon nanotubes for efficient photoanode of dye-sensi-tized solar cell. Nano–Micro Lett.
M.K. Nazeeruddin, & M. Gra¨tzel. (2019). Effect of annealing temperature on film morphology of organic–inorganic hybrid pervoskite solid-state solar cells. Adv. Funct. Mater, 24(21), 3250–3258.
R. Kumar. (2018). Planar heterojunction perovskite solar cells with superior reproducibility.
S. Aharon. (2015). Depletion region effect of highly efficient hole conductor free CH3NH3PbI3 per-ovskite solar cells. Phys, Chem, 16(22), 10512–10518.
J. Shiv., & Ravel N. (2018). (Modified two-step deposition method for high-efficiency TiO2/CH3NH3PbI3 heterojunction solar cells. ACS Appl. Mater. Interfaces 6(12), 9711–9718.

[Deepak Choudhary (2022), Improve the Photovoltaic Performing of Carbon-Form Perovskite Solar Cells, International Journal of Innovative Research in Computer Science & Technology (IJIRCST), Vol-10, Issue-1, Page No-66-72], (ISSN 2347 - 5552). www.ijircst.org

Deepak Choudhary

Department of Physics, D.J. College, Baraut, Uttar Pradesh, India (choudharydeepak962@gmail.com)

DOI:

DOI: 10.55524/ijircst.2022.10.1.11 DOI URL: https://doi.org/10.55524/ijircst.2022.10.1.11

Copyright © 2021 by author(s) and International Journal of Innovative Research in Computer Science & Technology Journal. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0) (http://creativecommons.org/licenses/by/4.0)