Experimental Study on Properties of Concrete Using Ceramic Waste as Fine Aggregate and Steel Fiber as Coarse Aggregate

Shahid Syed Beigh; Brahamjeet Singh

doi:10.55524/ijircst.2023.11.4.8

Abstract

Due to the day-to-day innovations and development in the construction field, the use of natural aggregates is increased tremendously and at the same time, the production of solid wastes from the demolitions of constructions is also quite high. Because of these reasons, the reuse of demolished constructional wastes like ceramic tile and granite powder came into the picture to reduce solid waste and to reduce the scarcity of natural aggregates for making concrete. The ceramic tile waste is not only occurring from the demolition of structures but also from the manufacturing unit. The investigation finds out with the partially replacement of fine aggregate with ceramic waste and steel fiber with coarse aggregate in the concrete mix of M30 was made and fresh and hardness tests were examined after 7 and 28 days. The investigation was achieved on cement concrete in which partial replacement of fine aggregate at percentages of 0%, 5%, 10%, 15% and 20% with ceramic waste and steel fiber with coarse aggregate at a percentage of 0%, 10%, 20% and 30% in M30 grade of concrete respectively.

Keywords

Ceramic waste, Steel fibre, Compressive strength, slump test, Split Tensile strength, Abrasion test

References

1. Indian standard 10262: 2009, Concrete Mix Proportioning: Guidelines.
2. Indian standard 1199: 1959, Methods of Sampling and Analysis of Concrete.
3. Indian standard 516: 1959, Methods of Tests for Strength of Concrete.
4. Is: 10262-1982, Recommended Guidelines For Concrete Mix Design, Bureau Of Indian
5. Is: 383-1970, Specification of Coarse And Fine Aggregate From Natural Sources
6. Is: 456-2000, Code of Practice For Plain And Reinforced Cement Concrete, Bureau Of Indian Standards, New Delhi, India.
7. Kamala r., Krishna rao b. (2012) “Reuse of solid waste from building demolition for the replacement of natural aggregates”, International Journal of Engineering and Advanced Technology. Volume 2, issue 1, pp 74-76.
8. Raval A.D, Patel I.N, Pitroda J.K.(2013) “Reuse Of Ceramic Industry Wastes For The Elaboration of Eco-Efficient Concrete”, International Journal Of Advanced Engineering Research And Studies. Volume 2, issue 3, pp 103-105.
9. Is:383-1970, Specification For Coarse And Fine Aggregate From Natural Sources For Concrete, Bureau Of Indian Standard, New Delhi.
10. Is:1489(part i)-1991, Specification For Portland Pozzolana Cement (Fly Ash Based), Bureau Of Indian Standard, New Delhi
11. Is:1199-1991, Methods For Sampling And Analysis Of Concrete, Bureau Of Indian Standard, New Delhi.
12. Is:9103-1999, Concrete Admixtures - Specification, Bureau Of Indian Standard, New Delhi
13. Is:10262-2009, Guidelines For Concrete Mix Design Proportioning, Bureau Of Indian Standard, New Delhi.
14. is:516-1959, Methods Of Tests For Strength Of Concrete, Bureau Of Indian Standard, New Delhi.
15. Raval a.d, patal i.n, pitroda j.k. (2013), Use of Ceramic Powder as a Partial Replacement of Cement, International Journal Of Innovative Technology & Exploring Engineering, volume 3, issue 2, pp 1-4.
16. Ch h.k, ramkrishna a, babu s. (2015), Effect of Waste Ceramic Tiles in Partial Replacement of Coarse & Fine Aggregate of Concrete, International Advance Research Journal In Science, Engineering & Technology. Volume 2, issue 6, pp 13-16.
17. Chandana s, katakam b.k, saha p. (2012), A Study of Sustainable Industrial Waste Material as Partial Replacement of Cement, International Association Of Computer Science And Information Technology. Volume 28, pp161-166.
18. Patel j, shah b.k., patel p.j.(2014) “The Potential Pozzolanic Activity Of Different Ceramic Waste Powder As Cement Mortar Component”, International Journal Of Engineering Trend And Technology. Volume 9, number 6, pp 267-271.
19. Tavakoli d, heidari a, karimian m.(2013) “Properties Of Concretes Produce With Waste Ceramic Tiles Aggregate”, Asian Journal Of Civil Engineering. Volume 14, number 3, pp 369-382.
20. Mohd mustafa al bakri abdullah et al., Concrete Ceramic Waste Slab (Ccws), Journal Of Engineering Research & Education, 3(1), 2006, 139-145.
21. V. Praveen kumar and dr. K. Chandrasekhar reddy, Durability Aspects of Concrete by Partial Replacement of Cement by Ceramic Waste. International Journal of Civil Engineering And Technology, 8(4), 2017, pp. 22–30.
22. Vimalkumar n patel, c d modhera and maulik panseriya, Utilization of Sanitary Ceramic Wastes in Concrete. International Journal of Civil Engineering And Technology, 8(4), 2017, pp. 711-718.
23. Amitkumar d. Raval, dr.indrajit n. Patel, prof. Jayeshkumar Pitroda, Ceramic Waste: Effective Replacement Of Cement For Establishing Sustainable Concrete, International Journal Of Engineering Trends And Technology (ijett), 4(6),2013, 2324-2329.
24. Abdullah anwar, sabih ahmad, syed mohd. Ashraf husain and syed aqeel ahmad, Replacement Of Cement By Marble Dust And Ceramic Waste In Concrete For Sustainable Development, International Journal Of Innovative Science, Engineering & Technology, 2(6),2015, 496-503.
25. M.s. Shetty, Concrete Technology Theory and Practice, S.Chand Publishing, 2006).

Cites this article as

S. S. Beigh, B. Singh, "Experimental Study on Properties of Concrete Using Ceramic Waste as Fine Aggregate and Steel Fiber as Coarse Aggregate", International Journal of Innovative Research in Computer Science and Technology (IJIRCST), Vol-11, Issue-4, Page No-37-47, 2023. Available from: https://doi.org/10.55524/ijircst.2023.11.4.8

Corresponding Author

Shahid Syed Beigh

M. Tech Scholar, Department of Civil Engineering, RIMT University, Mandi Gobindgarh, Punjab, India

Download Full Paper

Download PDF

No. of Downloads: 24 | No. of Views: 761

Experimental Study on Properties of Concrete Using Ceramic Waste as Fine Aggregate and Steel Fiber as Coarse Aggregate

Citations

Download Full Paper PDF

Total View 761

Total Download 24