Volume- 4
Issue- 4
Year- 2016
Article Tools: Print the Abstract | Indexing metadata | How to cite item | Email this article | Post a Comment
Dr. Riyadh S. Al-Turaihi
The study of three phase flow in horizontal and vertical pipe are important phenomena in oil and gas industry due to extracting process involve liquid, solid and gas phase. The effect of the particle amount, the discharge of gas and liquid have investigated experimentally on pressure distribution in horizontal pipe have been studied in this work. The work carried out for horizontal pipe with outer diameter (3.175 cm). A spherical stainless steel has used as solid particle. Air and water have used as gas and liquid phase respectively. Three different amount of gas discharge used namely 8.34, 16.67and 25 L/min. As well as, three different amount of liquid discharge used which are, 25, 30 and 35 L/min. It has found that the pressure distribution along horizontal pipe decrease with increase the air, liquid and particle amount.
[1] Oladele O.Bello,Kurt M. Reinkke and Catalin Teodorin " Particle Holdup Profiles in Horizontal Gas-liquid-solid Multiphase Flow Pipeline " Chemical Engineering & Technology, Volume 28, Issue 12, pp. 1546–1553, December, 2005
[2] Ranganathan Panneerselvam, Sivaraman Savithri and Gerald Devasagayam Surender," Computational Fluid Dynamics Simulation of Solid Suspension in a Gas-Liquid-Solid Mechanically Agitated Contactor ", Ind. Eng. Chem. Res. Downloaded from http://pubs.acs.org on December 20, 2008.
[3] B. Wang and A.B. Yu, " Numerical study of the gas–liquid–solid flow in hydrocyclones with different configuration of vortex finder ",Chemical Engineering Journal 135 ,pp. 33–42,2008.
[4] Zhihong Li, Shi Liu and Yanwei Hu, Wentie Liu," Numerical study on flow dynamics of gas-liquid-solid three phase flow through a channel ", IEEE, 2011.
[5] Mohan R. Rampure, Vivek V. Buwa and Vivek V. Ranade," Modelling of Gas-Liquid/Gas-Liquid-Solid Flows in Bubble Columns: Experiments and CFD Simulations ", The Canadian Journal of Chemical Engineering, Volume 81, June-August 2003.
[6] Tang Can, Liu Mingyan And Xu Yonggui," 3-D Numerical Simulations on Flow and Mixing Behaviors in Gas–Liquid–Solid Microchannels ", AIChE Journal , Vol. 59, No. 6 , June 2013.
[7] Niels G. Deen, Martin van Sint Annaland and J.A.M. Kuipers " Numerical Simulation of Particle Mixing in Dispersed Gas-Liquid-Solid Flows using a Combined Volume of Fluid and Discrete Particle Approach ", 6th International Conference on Multiphase Flow, ICMF 2007, Leipzig, Germany, July 9 – 13, 2007.
[8]Yong Jun Cho,Pung Sup Song,Sung Noon Kim,Young Kang And Sang Done Kim,"Stochastic Analysis Of Gas Liquid –Solid Flow In Three Phase Circulating Fluidized Beds",Journal Of Chemical Engineering Of Japan,Vol.34,No.2,Pp.254-261,2001.
[9] T. Sakaguchi,H. Minagawa,A. Tomiyama and H. Shakutsui" Pressure Drop in Gas-Liquid-Solid Three-Phase Slug Flow in Vertical Pipes" Experimental Thermal and Fluid Science, 7,p.p.49-60, 1993.
Department of Mechanical Engineering, College of engineering/ Babylon university, Irag.
No. of Downloads: 8 | No. of Views: 1031
