Role and Impact of Biomedical Engineering Discipline for Developing Country Perspective

Md. Rashid Al Asif; Saumendu Roy; Asif Abdullah; M. Raihan; Rozina Akter; Md. Zakir Hossain

Abstract

For a developing and largely populated country, it is quite difficult to solve all healthcare related issues using existing technology with affordable cost and desired precision. Moreover, to carry out biomedical research and design to improve biomedical equipment, devices and maintenance are usually very expensive. Thus, it is imperative and possible to extent indigenous technologies and raw materials for the research activities to design and develop sustained biomedical devices and equipment, artificial organ and tissue, prosthetics and implants, image modalities and healthcare related software at low-cost. Thus, the research and study related to biomedical engineering need to improve to understand the role and impact of this subject as a discipline.

Keywords

Dengue fever, dengue virus (DenV), promoter, bioinformatics, NCBI, Bangladesh

References

[1] S. Najarian, M. Fallahnezhad, and E. Afshari, “Advances in medical robotic systems with specific applications in surgery—A review,” Journal of medical engineering & technology, vol. 35, no. 1, pp. 19–33, 2011.

[2] D. P. Modi, V. P. Patel, R. B. Patel, J. N. Patel, B. V. Bhimani, and R. R. Shah, “Nanorobots: The Emerging tools in Medicinal,” International Journal of Drug Development and Research, vol. 5, no. 3, 2013.

[3] “A microchip to build a first-ever artificial kidney.” [Online]. Available: healthcare-ineurope.com/en/story/15956-a-microchip-to-builda-first-ever-artificial-kidney.html. [Accessed: 20- May-2018].

[4] “MyoKardia Develops Machine Learning Algorithm For Prediction of Hypertrophic Cardiomyopathy Using Wearable Biosensor: Interview |,” Medgadget, 08-Feb-2018.

[5] Sustained healthcare in the Third World: not possible without indigenous R&D and manufacture of healthcare equipment – keynote address by Dr. Rabbani on the 7th Appropriate Healthcare Technology Conference, London, UK, 18-19 Sept, 2012.

[6] “Medical imaging,” Wikipedia. 12-May-2018.

[7] “Biomedical Imaging & Image Processing,” Engineering in Medicine and Biology Society. [Online]. Available: https://www.embs.org/aboutbiomedical-engineering/our-areas-ofresearch/biomedical-imaging-image-processing/. [Accessed: 18-May-2018].

[8] U. of Sheffield, “What is Computational Medicine? - MSc Computational Medicine - The University of Sheffield.” [Online]. Available: https://www.sheffield.ac.uk/msc-computationalmedicine/what-is-computational-medicine. [Accessed: 18-May-2018].

[9] “Computational Medicine,” Johns Hopkins Department of Biomedical Engineering. [Online]. Available: https://www.bme.jhu.edu/graduate/mse/degreerequirements/computational-medicine/. [Accessed: 18-May-2018].

[10] “Computational Medicine,” Imperial College London. [Online]. Available: http://www.imperial.ac.uk/medicine/departments/ department-surgerycancer/research/integrative_systems_medicine/co mputational-systems-medicine/computationalmedicine/. [Accessed: 18-May-2018].

[11] “Tissue engineering,” Wikipedia. 18-May-2018.

[12] K. S. Masters and W. L. Murphy, “Tissue Engineering,” in Encyclopedia of Medical Devices and Instrumentation, American Cancer Society, 2006.

[13] D. Howard, L. D. Buttery, K. M. Shakesheff, and S. J. Roberts, “Tissue engineering: strategies, stem cells and scaffolds,” J Anat, vol. 213, no. 1, pp. 66–72, Jul. 2008.

[14] “Digital microscope,” Wikipedia. 05-Dec-2017.

[15] M. A. Aswathy and M. Jagannath, “Detection of breast cancer on digital histopathology images: Present status and future possibilities,” Informatics in Medicine Unlocked, vol. 8, pp. 74– 79, 2017.

[16] R. Kumar, R. Srivastava, and S. Srivastava, “Detection and Classification of Cancer from Microscopic Biopsy Images Using Clinically Significant and Biologically Interpretable Features,” Journal of Medical Engineering, 2015. [Online]. Available: https://www.hindawi.com/journals/jme/2015/4579 06/. [Accessed: 18-May-2018].

[17] P. Sajda, Machine learning for detection and diagnosis of disease, vol. 8. 2006.

[18] “Biomedical Signal Processing,” Engineering in Medicine and Biology Society. [Online]. Available: https://www.embs.org/aboutbiomedical-engineering/our-areas-ofresearch/biomedical-signal-processing/. [Accessed: 18-May-2018].

[19] “Biomedical Signal Processing and Control,” ResearchGate. [Online]. Available: https://www.researchgate.net/journal/1746- 8094_Biomedical_Signal_Processing_and_Contro l. [Accessed: 18-May-2018].

[20] J. Rajeswari and M. Jagannath, “Advances in biomedical signal and image processing – A systematic review,” Informatics in Medicine Unlocked, vol. 8, pp. 13–19, Jan. 2017.

[21] https://serc.carleton.edu/research_education/geoch emsheets/techniques/SEM.html, Accessed[19.05.2018]

[22] N. Cortadellas, E. Fernández and A. Garcia, Biomedical and Biological Applications of Scanning Electron Microscopy. 2012.

[23] “Biomanufacturing,” Wikipedia. 01-Jun-2018.

[24] https://www.biotech-careers.org/jobareas/biomanufacturing, Accessed[19.05.2018]

[25] “Welcome to Top1000Bio.com – The free BioManufacturing analysis that you can contribute to.” [Online]. Available: http://top1000bio.com/. [Accessed: 01- Jun2018].

[26] "Biomanufacturing Research Institute & Technology Enterprise (BRITE)", Crbusa.com. [Online]. Available: https://www.crbusa.com/biomanufacturingresearch-institute-technology-enterprise-brite. [Accessed: 01- Jun- 2018].

[27] "Unleashing the Power of Bio Tech at NCCU", Nccu.edu. [Online]. Available: http://www.nccu.edu/brite/index.cfm. [Accessed: 01- Jun- 2018].

[28] “Elastography,” Wikipedia. 15-May-2018.

[29] J. P. Celli et al., “An imaging-based platform for high-content, quantitative evaluation of therapeutic response in 3D tumour models,” Scientific Reports, vol. 4, p. 3751, Jan. 2014.

[30] S. Tyagi and S. Kumar, "Clinical Applications of Elastography: An Overview", International Journal of Pharma and Bio Sciences, vol. 1, no. 3, pp. 1-8, 2010.

[31] http://ehealth-connection.org/content/mhealthand-mobile-telemedicine-an-overview, Accessed [19.05.2018]

[32] K. Shameer, M. A. Badgeley, R. Miotto, B. S. Glicksberg, J. W. Morgan, and J. T. Dudley, “Translational bioinformatics in the era of realtime biomedical, health care and wellness data streams,” Brief Bioinform, vol. 18, no. 1, pp. 105– 124, Jan. 2017.

[33] P. Baldi and S. Brunak, Bioinformatics: the machine learning approach. MIT press, 2001.

[34] P. Larrañaga et al., “Machine learning in bioinformatics,” Brief Bioinform, vol. 7, no. 1, pp. 86–112, Mar. 2006.

[35] L. Morales, M. D. Morales, A. Jiménez-Ramírez, and M. J. Escalona, “A Microcontroller Based System for Controlling Patient Respiratory Guidelines,” in Bioinformatics and Biomedical Engineering, 2017, pp. 631–641.

[36] “Research – Biomedical Engineering.” [Online]. http://bme.buet.ac.bd/?page_id=1464. [Accessed: 20-May-2018].

[37] S. Sousa, J. Leitão, R. Martins, J. Sanches, J. Suri and A. Giorgetti, "Bioinformatics Applications in Life Sciences and Technologies", BioMed Research International, vol. 2016, pp. 1-2, 2016.

[38] A. Lapidus, "Bioinformatics and its applications", Saint Petersburg.

[39] A. Rajathi, A. Raj, P. Rajalakshmy and K. Nigel, "Review on Biomedical Instrumentation / Biomedical Engineering and its Various Applications", International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, vol. 3, no. 3, pp. 7707-7719, 2014.

[40] M. Strait and M. Scheutz, "What we can and cannot (yet) do with functional near infrared spectroscopy", Frontiers in Neuroscience, vol. 8, no. 117, pp. 1-12, 2014.

[41] M. Rahman and M. Ahmad, "Lie Detection from fNIR Signal and NeuroImage", in 2016 International Conference on Medical Engineering, Health Informatics and Technology (MediTec), Dhaka, 2016, pp. 1-6.

Cites this article as

M. R. A. Asif, S. Roy, A. Abdullah, M. Raihan, R. Akter, M. Z. Hossain, "Role and Impact of Biomedical Engineering Discipline for Developing Country Perspective", International Journal of Innovative Research in Computer Science and Technology (IJIRCST), Vol-6, no.4, pp.87-90, 2018. Available from: https://doi.org/10.21276/ijircst.2018.6.4.9

Corresponding Author

Md. Rashid Al Asif

Department of Computer Science and Engineering, Jessore University of Science and Technology, Jessore-7408, Bangladesh

Download Full Paper

Download PDF

No. of Downloads: 12 | No. of Views: 1276

Advancing Surgical Imaging with cGAN for Effective Defogging

Lingxi Xiao, Ruilin Xu, Yiru Cang, Yan Chen, Yijing Wei.

May 2024 - Vol 12, Issue 3
Intelligent Plant Disease Diagnosis Using Machine Learning Techniques- A Review

Anuj Kumar Kem, Ayush Chauhan, Mohan Agnihotri, Aniruddh Kumar.

May 2024 - Vol 12, Issue 3
Optimizing Real-Time Object Detection- A Comparison of YOLO Models

Pravek Sharma, Dr. Rajesh Tyagi, Dr. Priyanka Dubey.

May 2024 - Vol 12, Issue 3

IJIRCST

Role and Impact of Biomedical Engineering Discipline for Developing Country Perspective

Citations

Download Full Paper PDF

Total View 1276

Total Download 12