Study the Behaviour of Using Steel Scrap in Concrete

Aquib Amin

doi:10.55524/ijircst.2022.10.5.17

Abstract

Today the construction industry is in need of finding cost effective materials for increasing the strength of concrete structures. This project work emphasis on the study of using steel scrap in the innovative construction industry. Steel Scrap concrete is a concrete containing fibrous material that is uniformly distributed and casually oriented. This paper aims to have a comparative study between turn fiber, binding wire and steel nail in M25 concrete. The tests conducted were slump test, compressive strength test, split tensile strength test and for this concrete cubes, beams and cylinders were cast and cured and tests were done at 3rd day, 7th day and 28th day.

Keywords

LSSRC- Lathe steel scrap reinforced concrete, flexural strength, compressive strength, split tensile strength

References

K.R.Venkatesan “Studied the behavior of high strength steel fibre reinforced concrete beams for flexure” International Journal of Engineering Science and Innovative Technology (IJESIT) vol.4 january 2015.
E.Mello “Studied the improvements in concrete properties with addition of carbon and steel fibres” International Journal of Civil, Structural, Construction and Architectural Engineering Vol:8, No:3, 2014.
Amit Rana,studied the fibre reinforced concrete properties, International Journal of Emerging Technology and Advanced Engineering (IJETAE) vol.3 jan.2013.
M.Tamilselvi “Studied the properties of steel and polypropylene fibres reinforced concrete. In this study cubes, cylinders and prisms were casted using M25 grade concrete and reinforced with steel and polypropylene fibres” International Journal of Engineering and Innovative Technology (IJEIT) Volume 3, Issue 1, July 2013.
Shende.A.M “made comparative studies on steel fibre reinforced cum control concrete under flexural and deflection” international journal of applied engineering research, dindigul Volume 1, No 4, 2011.
DR.Th. Kiranbala Devi,Studied the effects of Steel Fibres in Reinforced Concrete,International Journal of Engineering Research and Technology (IJERT) vol.2 oct-2013.

Cites this article as

[Aquib Amin, Er. Anuj Sachar (2022), Study the Behaviour of Using Steel Scrap in Concrete, International Journal of Innovative Research in Computer Science & Technology (IJIRCST), Vol-10, Issue-5, Page No-119-124], (ISSN 2347 - 5552). www.ijircst.org

Corresponding Author

Aquib Amin

M.Tech Scholar, Department of Civil Engineering, RIMT University, Mandigobindgarh, Punjab, India

Download Full Paper

Download PDF

No. of Downloads: 7 | No. of Views: 191

Design of High Strength Concrete Using Stone Dust

Aqsa Muzaffar Bulbul, Brahamjeet Singh.

May 2023 - Vol 11, Issue 3
Experimental Investigation Mechanical Properties of Concrete Mix with Chopped Jute Fiber and Fly Ash

Nadiya Majeed, Brahamjeet Singh.

March 2023 - Vol 11, Issue 2
Stabilization of Black Cotton Soil by Using Waste Foundry Sand and Crushed Waste Glass

Ishrat Mairaj.

March 2023 - Vol 11, Issue 2

IJIRCST

Study the Behaviour of Using Steel Scrap in Concrete

Citations

Download Full Paper PDF

Total View 191

Total Download 7